Are you thinking of getting yourself a tile saw? Or do you have a project to finish that needs a tile saw? In any case, there are tons of things that you should know about before you start using this machine.
They can be used for diverse tasks, so having one is actually quite handy. Moreover, they actually come with a water supply, which cools down the blade during operation. That is why they are alternatively known as a wet tile saw.
However, having this information is often not enough. There are tons of other things that you need to know to operate them properly without any hassles and hazards.
That is why read this comprehensive article to find answers to your questions regarding tile saws. This interesting tool has a lot to offer, and they come with a lot of pros and cons.
To operate them safely, you need to know about each and every part of them. Hence, we will be answering questions that will be covering every aspect of using a tile saw.
Frequent Questions Regarding Tile Saws
1. Is a tile saw required to cut tiles?
Normally, you can cut tiles with other types of saws/cutter as well. However, when it comes to porcelain or ceramic tile, you should get the job done with a wet tile saw, which includes a diamond blade.
Otherwise, the tiles may get a little damaged, and you surely wouldn’t want that.
2. How long does a tile saw blade normally last?
There are both high and low-quality blades available out there. In general, the low-quality ones can last for up to 12 cutting hours if the condition and the techniques are right.
On the other hand, high-quality ones can last even as long as 120 hours. That is, with proper maintenance and techniques. Otherwise, their duration might get reduced to half of their actual life span.
3. What is the perfect blade to cut porcelain tile?
Porcelain is sturdy materials, but they seem to chip quite easily. Hence, the ideal blade to cut them would be narrow continuous rim blades. They make the porcelain chip relatively less compared to their counterparts. But, they do wander a little, due to excessive flexibility of the blade face.
4. Cantile saws and table saws are be used interchangeably?
Although you shouldn’t really be cutting tiles with table saws, it is actually possible to do so. You can cut stone or ceramic tiles with them. However, the dry blade will make the tiles chip a lot more than a wet blade would.
5. Why is a wet tile saw more preferred than a dry one?
Tile saws are usually used to cut really dense materials, such as porcelain. Working with such materials can cause the blade to smoke or overheat, which might create unwanted hazards.
The water supply keeps the blade cool and prevents this phenomenon. It also makes sure the tiles chipless. Hence, they are more preferred.
6. Do Cantile saws severely injure humans?
Compared to other saws, the tile ones are actually safer. First of all, they come with a protective cover. And second of all, even though their blades are sharp, in the worst-case scenario, your hand will only get a burn or a cut.
However, you can never be too careful, so be as precautionary as possible.
7. Can you cut a U-Shaped tile?
Yes, you definitely can. However, the process is a little different from cutting the tile straight.
First of all, you need to mark the line with a chalk or grease pencil on the tile. Afterward, make a few straight cuts along the sides of the mark. Stop as soon as the cut reaches the mark.
Take a tile nipper, and cut off the teeth of the tiles. Again, stop as soon as you reach the mark. Finally, to smoothen the edge of the tile, hold it in your hand while the saw is turned over, and slowly let the machine grind any excess porcelain.
8. What are the necessary precautions to take before using a tile saw?
Make sure to wear PVC gloves, eye protection, and hearing protection before you start operating the tool. Also, check the tool carefully before you plug it with the power source. Check the water supply and the area of work as well.
9. When and how to replace a tile saw blade?
Even though blades do have an approximate life span, you should still check from time to time whether or not it needs to be replaced. At first, you should look out for cracks, excessive noise, and speed.
If the blade needs to be replaced, then purchase a suitable replacement. Afterward, remove the cover and the locking nut, using the necessary tools. Remove the blade and attach a new one similarly.
Be careful while you are at it, and also wear protective gear.
10. How to sharpen a tile saw blade?
When you are about to sharpen the saw’s blade, start by reducing the water flow. Afterward, choose an abrasive item to sharpen the blade. Cut into the item for at least 4 to 5 times.
Then, turn off both the saw and the water flow and wait for the blade to stop spinning. Unplug the saw, and examine the blade thoroughly. If it isn’t sharpened yet, then repeat the process again.
Tile saws are not very different from other types of saws. So, if you have experience with other saws, then you have nothing to worry about.
We have already covered most of the information that you will be needing to starting cutting tiles. So, hopefully, you can get started with your project already.